The numbers in the substring() function are the offset and length. So
> All,
>
>
>
> I have been having a long struggle to get the ISC DHCP
> daemon to differentiate based on DHCP attributes so as to assign devices
> to
> different pools and trigger different scripts. I have 4 different models
> at
> the moment (and might expand this in the future) and the classes look like
> this:
>
>
>
> class "GE112Pro" {
>
> match if (option vendor-class-identifier) = "ADVA FSP
> 150-GE112Pro"
> ;
>
> }
>
>
>
> class "GE112ProH" {
>
> match if (option vendor-class-identifier) = "ADVA FSP 150-GE112Pro
> (H)";
>
> }
>
>
>
> class "XP116Pro" {
>
> match if (option vendor-class-identifier) = "ADVA
> FSP150CC-XG116PRO";
>
> }
>
>
>
> class "Overture" {
>
> match if (substring (host-name,0,4)) = âestaxâ);
>
> }
>
>
>
> The subnet assignment looks like this:
>
>
>
> subnet 10.65.16.0 netmask 255.255.248.0 {
>
> interface eth0;
>
> option routers 10.65.23.254;
>
> option subnet-mask 255.255.248.0;
>
> option broadcast-address 10.65.23.255;
>
>
>
> set location = "VIC";
>
>
>
> pool {
>
> allow members of "GE112Pro";
>
> include "/etc/dhcp/GE112Pro.conf";
>
> range 10.65.23.236 10.65.23.240;
>
> }
>
>
>
> pool {
>
> allow members of "GE112ProH";
>
> include "/etc/dhcp/GE112ProH.conf";
>
> range 10.65.23.241 10.65.23.243;
>
> }
>
> pool {
>
> allow members of "XP116Pro";
>
> include "/etc/dhcp/XP116Pro.conf";
>
> range 10.65.23.244 10.65.23.245;
>
> }
>
> pool {
>
> allow members of "Overture";
>
> include "/etc/dhcp/on-commit.conf";
>
> range 10.65.23.246 10.65.23.249;
>
> }
>
> }
>
>
>
> The problem I have is that the Overture device is being ignored by the
> DHCP
> daemon when it receives a discover packet. This is what a TCPDUMP of the
> discover packet looks like:
>
>
>
> 01:46:27.024101 IP (tos 0x0, ttl 26, id 36818, offset 0, flags [none],
> proto UDP (17), length 362)
>
> 10.65.23.253.bootps > man01.syd04.nsw.vocus.net.au.bootps: [udp sum
> ok]
> BOOTP/DHCP, Request from 00:0a:c6:51:1a:50 (oui Unknown), length 334, xid
> 0x5a031d96, Flags [none] (0x0000)
>
> Gateway-IP 10.65.23.253
>
> Client-Ethernet-Address 00:0a:c6:51:1a:50 (oui Unknown)
>
> Vendor-rfc1048 Extensions
>
> Magic Cookie 0x63825363
>
> DHCP-Message Option 53, length 1: Discover
>
> PAD Option 0, length 0
>
> MSZ Option 57, length 2: 1024
>
> Parameter-Request Option 55, length 19:
>
> Server-ID, Lease-Time, RN, RB
>
> Subnet-Mask, Default-Gateway, Domain-Name-Server,
> Domain-Name
>
> BR, NTP, BF, Option 224
>
> Option 225, Option 227, Option 228, Option 229
>
> Option 230, Option 231, Option 232
>
> PAD Option 0, length 0, occurs 3
>
> Hostname Option 12, length 15: "estax-51-1a-50^@"
> <<<<< What I am trying to filter on
>
> PAD Option 0, length 0, occurs 3
>
> Client-ID Option 61, length 15: "estax-51-1a-50"
>
> PAD Option 0, length 0, occurs 3
>
> T232 Option 232, length 18:
> 12346,12848,12595,12593,12848,21553,13621,13104,13658
>
> END Option 255, length 0
>
> PAD Option 0, length 0
>
>
>
> Have I missed something obvious? I have tried a number of different
> combinations of syntax here, most of which are excepted when I do the
> restart of the daemon. I even have a work around that works: if you remove
> the âOvertureâ class definition altogether and just create a generic
> pool
> at the end of the pool definitions, the DHCP daemon responds to the
> requests, assigning a correct IP address and triggering the
> âon-commit.confâ configuration.
>
>
>
> Would welcome any suggestions on what I have missed.
>
> Adam Raymond
> _______________________________________________
> dhcp-users mailing list
>
[hidden email]
>
https://lists.isc.org/mailman/listinfo/dhcp-users>
Locked
